Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .05 in. (1.27 mm)

Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .05 in. (1.27 mm) L: 1.73 in. (43.4 mm)

Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .025 in. (.635 mm)

Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .025 in. (.635 mm) L: 1.73 in. (43.9 mm)

Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .01 in. (.25 mm)

Tip Cleaning Shaft for Hot Tip Desoldering Tips Shaft Dia: .01 in. (.25 mm) L: 1.73 in. (43.9 mm)

Tip Cleaning Shaft for LN278 Shaft Dia: .01 in. (.25 mm) L: 2.62 in. (66.56 mm)

Tip Cleaning Shaft for LN278 Shaft Dia: .01 in. (.25 mm) L: 2.62 in. (66.56 mm)

Maintenance Tool with CSX71 Tip Cleaning Shaft for TSX70 Dia.: .22 in. (5.6 mm)

Maintenance Tool with CSX71 Tip Cleaning Shaft for TSX70 Dia.: .22 in. (5.6 mm) L: 3.38 in. (85.9 mm)

Tip Cleaning Shaft and O-Ring Guide for CSX70 Dia.: .05 in. (1.3 mm)

Tip Cleaning Shaft and O-Ring Guide for CSX70 Dia.: .05 in. (1.3 mm) L: 1.37 in. (34.8 mm)

ATMOSCOPE SMD Hot Air Hand Tool 120V 60 Hz

ATMOSCOPE SMD Hot Air Hand Tool uses a non-contact method of rework, such as hot air so that both the SMD and the circuit board are kept at lower temperatures. This results in a faster, cleaner and safer rework cycle then the conventional contact rework method

*Requires Regulated Shop Air Source

Hot Air Tool using the CL1280 230V European Style

The hot air tool FA489 is exclusively designed for soldering and desoldering flat electronic components

Small End Cap Filter Assembly to be used with AF625 and SC525 includes OS132 and OS731

Small End Cap Filter Assembly to be used with AF625 and SC525 includes OS132 and OS731

Filter Cartridge Assembly with AF625, FC639, OS132 and SC525

Filter Cartridge Assembly with AF625, FC639, OS132 and SC525