1
|
LONER ATMOSCOPE Self-Contained SMT Hot Air Station
Save $341.12 off this product until 09/30/10 (REGULARLY - 816.12)!
LONER ATMOSCOPE Self-Contained SMT Hot Air Station with FA069 PS542 and PD525. This station is perfect for lab-type settings where shop air is not available. With a helpful variety of hot air tips at your disposal you will find soldering with this station a breeze.
|
 |
|
LONER ATMOSCOPE Self-Contained SMT Hot Air Station
LONER ATMOSCOPE Self-Contained SMT Hot Air Station 230V European Style with FA069, PS542 and PD525
This station is perfect for lab-type settings where shop air is not available. With a helpful variety of hot air tips at your disposal you will find soldering with this station a breeze.
|
|
|
Self-Contained SMT Deluxe Hot Air Station
Self-Contained SMT Deluxe Hot Air Station with LU26 Hot Air Tip and LT375 Soldering Tip (24V Controlled Output)
|
 |
|
LONER ATMOSCOPE SMT Hot Air and Soldering Station
LONER ATMOSCOPE SMT Hot Air and Soldering Station Requires Shop Air (60-90 psi). This station is perfect for work environments that have access to shop air or nitrogen. With it's heater configuration it features a quick heat-up to reliable and stable temperatures.
|
 |
|
ATMOSCOPE Deluxe SMT Hot Air and Soldering Station
ATMOSCOPE Deluxe SMT Hot Air and Soldering Station 230V European Style Requires Shop Air (60-90 psi). This station is perfect for work environments that have access to shop air or nitrogen. With it's heater configuration it features a quick heat-up to reliable and stable temperatures.
|
|
|
LONER ATMOSCOPE Deluxe SMT Hot Air Station
LONER ATMOSCOPE Deluxe SMT Hot Air Station 230V European Style Requires Shop Air (20-80 psi)
|
 |
|
LONER ATMOSCOPE SMT Hot Air Station with PR570, PAS53 and PD533
Our best value when it comes to hand-held SMT rework and
other hot air applications. This station has the
versatility to suit a large variety of applications and
it's modular design offers outstanding performance with
either hot air or traditional contact rework.
NOTE: Shop Air Required.
|
|
|
LONER ATMOSCOPE SMT Hot Air Station with PR570, PAS53 and PD533
|
|
|
ATMOSCOPE SMD Hot Air Hand Tool 120V 60 Hz
ATMOSCOPE SMD Hot Air Hand Tool uses a non-contact method of rework, such as hot air so that both the SMD and the circuit board are kept at lower temperatures. This results in a faster, cleaner and safer rework cycle then the conventional contact rework method
*Requires Regulated Shop Air Source
|
 |
1
|
|
|
